Sako Quad P04R Heavy Barrel .22LR does not eject?

Discussion in 'Sako Rimfires and Small Action Rifles' started by Jari.Vaananen, Jul 8, 2015.

  1. Jari.Vaananen

    Jari.Vaananen Member

    Messages:
    2
    Likes Received:
    0
    Country Flag:
    Finland
    State/Region:
    European Union
    I got a sako quad heavy barrel about one year ago with .22LR and .17HMR barrel.
    .17HMR works OK but .22LR didn't eject CCI, winchester, remington and logos.
    Thats why it have been allready twice on service. Now at least CCI (50pcs) was working OK but logos are not.
    Here is one video:
    https://www.dropbox.com/s/fnj2cj1e0iqfou4/MOV_0168.mp4?dl=0


    Any ideas how to fix that?
     

  2. cmjr

    cmjr Well-Known Member

    Messages:
    876
    Likes Received:
    16
    Country Flag:
    USA
    State/Region:
    US Texas
    This is not uncommon with the Quad, go over to RFC to the Sako section and bring it up. You'll be directed to several posts on how to fix it. The issue is the profile of the extractor, few licks with a file and it's fixed. There used to be a guy on there that for 10.00 plus postage would do it.
     
  3. Jari.Vaananen

    Jari.Vaananen Member

    Messages:
    2
    Likes Received:
    0
    Country Flag:
    Finland
    State/Region:
    European Union
    Thanks cmjr...
    RFC looks good forum...
     

Share This Page

This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Okay More information