• Hey All! Lately there has been more and more scammers on the forum board. They register and replies to members requests for guns and/or parts or other things. The reply contains a gmail or hotmail address or similar ”anonymous” email addresses which they want you to reply to. DO NOT ANSWER ANY STRANGE MESSAGES! They often state something like this: ”Hello! Saw your post about purchasing a stock for a Safari. KnuckleheadBob has one. Email him at: [email protected]” If you receive any strange messages: Check the status of whoever message you. If they have no posts and signed up the same day or very recently, stay away. Same goes for other members they might refer to. Check them too and if they are long standing members, PM them and ask if the message is legit. Most likely it’s not. Then use the report function in each message or post so I can kick them out! Beware of anything that might seem fishy! And again, for all of you who registered your personal name as username, please contact me so I can change it to a more anonymous username. You’d be surprised of how much one can find out about a person from just a username on a forum such ad our! All the best! And be safe! Jim

Sako Forester 243 win.

Sako Collectors Club Discussion Forum

stilwater36

Member
Joined
Feb 8, 2009
Messages
3
Hello this my first post. So if I am in the wrong place let me know. I am looking at a used Sako Forester 243 win. 24" barrel. Is said to be in NRA 98% condition. Intermed. action /heavy barrel. Looks good on photos. Serial no. 55210. This would be my first Sako and I want a Antelope/Varmit rifle. Listed on GB web site auction 64359487. Never purchased a used rifle before only new so I would like your input.
 
Hi Stillwater,
I recently bought one similar, also with heavy barrel. One important item is throat erosion. FYI the throat is the "lead" ahead of the chamber that guides the bullet into the rifling (if I'm not describing this well, I'm sorry). My gun had been shot a LOT and shot when the barrel was hot. This kind of abuse will erode the throat, literally blowing the metal out the muzzle (the sharp end of the stick ;-) If you can get some information about throat condition, that would be very beneficial. This would involve a chamber cast, using a soft metal poured in the chamber and throat, this gives a negative impression of the chamber/barrel internal surface. The other way is a bore scope, less hassle, more expensive equipment, and both methods require a gunsmith who is experienced at the interpretation of the result. Is that a long enough answer? Good luck P.
 

Latest posts

Back
Top