1. Hey All! Lately there has been more and more scammers on the forum board. They register and replies to members requests for guns and/or parts or other things. The reply contains a gmail or hotmail address or similar ”anonymous” email addresses which they want you to reply to. DO NOT ANSWER ANY STRANGE MESSAGES! They often state something like this: ”Hello! Saw your post about purchasing a stock for a Safari. KnuckleheadBob has one. Email him at: [email protected]” If you receive any strange messages: Check the status of whoever message you. If they have no posts and signed up the same day or very recently, stay away. Same goes for other members they might refer to. Check them too and if they are long standing members, PM them and ask if the message is legit. Most likely it’s not. Then use the report function in each message or post so I can kick them out! Beware of anything that might seem fishy! And again, for all of you who registered your personal name as username, please contact me so I can change it to a more anonymous username. You’d be surprised of how much one can find out about a person from just a username on a forum such ad our! All the best! And be safe! Jim
    Dismiss Notice

Short Actions Sako AI front trigger guard screw - replacement wanted

Discussion in 'Sako Short Actions' started by FCSA-UK, Jun 19, 2022.

  1. FCSA-UK

    FCSA-UK Member

    Messages:
    2
    Likes Received:
    0
    Country Flag:
    UK
    State/Region:
    UK England
    Hi,

    I have a Sako AI (new to me), just finished renovating the stock after a re-barrel and on re-assembly I realise that I need a new front trigger guard/action screw.


    The original is 29.77mm or 1 1/10" long, blued and slotted. Anyone know where I can find a quality replacement? Custom shop inc only seem to sell 1 1/16" (27mm) screws.

    Many thanks,

    Chris
     

  2. marlin92

    marlin92 Well-Known Member

    Messages:
    836
    Likes Received:
    282
    Country Flag:
    USA
    State/Region:
    US Pennsylvania
  3. FCSA-UK

    FCSA-UK Member

    Messages:
    2
    Likes Received:
    0
    Country Flag:
    UK
    State/Region:
    UK England
    Many thanks I'll give them a try , just for clarity the screws are not 1 1/10" (my mistake), they are closer to 1 1/6" - however being european I suspect the original specs are M6x 30mm.
     

Share This Page