Not quite sure

Discussion in 'General Sako Discussions' started by Jody eastin, Aug 20, 2020.

  1. Jody eastin

    Jody eastin Member

    Messages:
    8
    Likes Received:
    5
    Country Flag:
    USA
    State/Region:
    US Illinois
    Question please help what bases and ring hight for a vortex viper pst on a m995 7 mag long or extended?

     

  2. bigcountry4me

    bigcountry4me Well-Known Member

    Messages:
    820
    Likes Received:
    328
    Country Flag:
    USA
    State/Region:
    US Oregon
    Probably would help to know which Viper scope your leaning towards. Take a look at the Vortex website, specifically the technical data for each PST Viper. Each riflescope has exact measurements for ring spacing. Obviously, all the maintubes are 30mm. In my opinion you won’t need to extend anything. However, knowing exactly what you have to work with (both dovetails and tube length) is critical. IMHO Leupold 30mm highs would mount the 5-25x50 if that’s the direction your headed. Obviously, this is one scenario in many, because you could pick a different scope all together, and a different ring maker. Good luck.
     
  3. Jody eastin

    Jody eastin Member

    Messages:
    8
    Likes Received:
    5
    Country Flag:
    USA
    State/Region:
    US Illinois
    It is a pst 4x16x50 thanks
     

Share This Page