• Hey All! Lately there has been more and more scammers on the forum board. They register and replies to members requests for guns and/or parts or other things. The reply contains a gmail or hotmail address or similar ”anonymous” email addresses which they want you to reply to. DO NOT ANSWER ANY STRANGE MESSAGES! They often state something like this: ”Hello! Saw your post about purchasing a stock for a Safari. KnuckleheadBob has one. Email him at: [email protected]” If you receive any strange messages: Check the status of whoever message you. If they have no posts and signed up the same day or very recently, stay away. Same goes for other members they might refer to. Check them too and if they are long standing members, PM them and ask if the message is legit. Most likely it’s not. Then use the report function in each message or post so I can kick them out! Beware of anything that might seem fishy! And again, for all of you who registered your personal name as username, please contact me so I can change it to a more anonymous username. You’d be surprised of how much one can find out about a person from just a username on a forum such ad our! All the best! And be safe! Jim

New too me rifle

Sako Collectors Club Discussion Forum

The OP from Sask will appreciate that suppressors are not legal in Canada. $300 very good deal.
 
He’s a coworker and friend of mine that due too health issues no longer hunts, so he gave me a good deal on it.
 
Why do you think the dovetails have been drilled? Looks to me like it has ordinary slide-on Weaver mounts with set screws. The set screws mar the checkering on the top of the dovetail, but you don't normally drill holes to mount the bases. The cosmetic damage can usually be mitigated with careful hand work.
Interesting.......

If the mount bases are aluminum, I would think that that attaching screws would require the action to be drilled and tapped........for holding the bases in place.
I'd think that driving the aluminum bases into position would deform the material enough such that just "jam" screws would not be enough to keep the mounts from moving.

Thoughts????......
 
Interesting.......

If the mount bases are aluminum, I would think that that attaching screws would require the action to be drilled and tapped........for holding the bases in place.
I'd think that driving the aluminum bases into position would deform the material enough such that just "jam" screws would not be enough to keep the mounts from moving.

Thoughts????......
All the Weaver aluminum bases I’ve seen have slid on the dovetails and are held by CLAMP or SET screws. They get hammered on pretty tight from recoil and usage. I have never actually seen any distortion or deformation, but mine all came on lighter Recoil chamberings (.222 .243).
 
Being a 7mm I can see why a previous owner magna ported the rifle. It really helps with the recoil on the larger ammo.
You should be using some kind of hearing protection whatever you shoot, or you may end up learning sign language.
A friend who owned a 338 Sako had it ported and I can attest the kick was somewhat less. Plus the barrel did not jump off the bag at the bench. I got a really good deal on a sako 308 HB that had been ported. It may be loud to others around me, but I don't notice because I have good hearing protection. Although with one Coyote down the rest of them have headed for the hills...lol
 

Attachments

  • MagNaPort.jpg
    MagNaPort.jpg
    40.9 KB · Views: 3

Latest posts

Back
Top