Finnwolf VL63 finnwolf accuracy

[lhsako]

I'm considering getting a finnwolf .308. what accuracy do u guys get @ 100yds? plz PM me,,,thanks

 

[Anonymous]

Post moved to discussion thread on Finnwolf, Vl63, etc.
Thanks,
S-A

 

[misako50]

lhsako- I get exceptional accuracy with my .308 Finnwolf. They are as accurate as any rifle that I shoot on a regular basis,ie:hunting. The action screws play a very important part in that function.(more so on the wolf than the bolt rifles) That has been my experience. I have a .7-08Rem. custom finnwolf that shoots well also. The .243 Finnwolf hasn't had a real good test but it seems to offer excellent accuracy also. Buy a good one. You won't be sorry.-Misako

 

[northernlights]

The action screws play a very important part in that function.(more so on the wolf than the bolt rifles)[/U] That has been my experience. I have a .7-08Rem. custom finnwolf that shoots well also. The .243 Finnwolf hasn't had a real good test but it seems to offer excellent accuracy also. Buy a good one. You won't be sorry.-Misako </p>
-misako50] lhsako

misako50....Please elaborate on what I underlined in your post. Thanks

 

[lhsako]

can misako and nl elaborate on just how accurate. what size 3 shot groups will these levers shoot at 100 yds? and w/ what loads?,,,ty

 

[oldgoat]

At the range on a sturdy bench @ 100 yds (mid Sept., temp around 70) my 308 finnwolf put a 3 shot group just covered by a nickel. (Two shots touched and 1 flyer). This was done with my reloads, worked up for my rifle. My 243 finnwolf shoots just as well. I consider the finnwolf to be a very accurate and well made rifle. PS, where in PA are you?? I am also in PA (Jersey border).

 

[misako50]

I have accuracy experience somewhat the same as "oldgoat". My loads will not be published on a forum again. Let me know if you buy one and I may share thru the PM system. I have found over the years that components are more important than "loads" when it comes to accuracy. What I go thru to get "there", may be totally unacceptable from one person to another. I can tell you that the loads I use in my bolt rifles are near maximum and the loads in my Finnwolf are not. they are 2 whole grains short. I also would not reload more than 5 or six times with the brass I use. Others may wish to walk a finer line and get more mileage from their brass. If I didn't give a damn about blowing up a rifle, then I might develope a different personna, but for now, I have never met a Sako I didn't like. Stock screws and tightness have always been important for accuracy( among other things) in my rifles. One Finnwolf in particular was very sensitive to change. All three of them are somewhat sensitive. Rule of thumb is to get them as tight as reason and common sense allows.-Misako

 

[lhsako]

somewhat? how hard is it to measure a group w/ a caliper misako? just having some fun w/ u...lol. i've been reloading for 39 year so i know the dance. i also hunt w/ max. loads and could care less about brass life. i'm interested in performance on game. quick humane kills always! thanks to you and oldgoat for your imput. tight groups>>>>>

 

[misako50]

Lhsako- A short time ago, I had a good day at the range and had my .308 Finnwolf for a final test prior to Deer season. I was using factory Winchester Loads (not the expensive ones just super X) and had three holes under a dime and printed the fourth right where I wanted the scope set at. Three holes touching with a Finnwolf or any lever action is exceptional. I've done similar shooting with my Forester Del. which I call my #1 gun and get the accuracy to a nice level if I am not hurried or it isn't windy or otherwise uncomfortable. What I have done are groups that are fair, good or mediocre, but it depends on me and not the rifle a good share of the time. As for publishing my loads, I did that wrong once and won't take a chance on doing it wrong again.-Misako

 

[lhsako]

that says alot for the factory ammo! impressive. always nice to have a factory load that shoots well even if u load ur own. what would would say is the average 3 shot group on calm days at the range?

 

[misako50]

Wind isn't a factor at the range, it just bugs me. The range is well protected but I hate it blowing at me or on me. You can expect Sako 1MOA accuracy from a Finnwolf. my "average" probably isn't that good. If you are looking for a definitive answer, i have to be honest and tell you I don't shoot enough thru any one hunting rifle to come to any concrete conclusions, other than my forester. I might also tell you that two of the FWs are custom rifles with new barrels(sako) and the .308 is factory.-Misako

 

[lhsako]

that clears it up. "average" includes the best AND worst groups. consistent 1.5" groups from a lever rifles @ 100 yds is great. 2" much more common.

 

[rugerbob]

One shot kill 220 yards with a 308 Finnwolf, dropped like a rock.

 

[Anonymous]

Holy Mooses:bigsmile3:! Good shooting! That's some pretty thick cover for that long a shot.
S-A

 

[bloorooster]

Wow!

 

[misako50]

Yikes!- That's a lot of Bullwinkle

- I have tagged a couple of those with a .308W but only in a bolt gun. They didn't go far either. They were both within 125 yds. tho.-Misako

 

[northernlights]

What .308 bullet are you guys using to shoot moose?
RugerBob, that was fine marksmanship with your .308 Finnwolf! Again, I think this shows that a Sako's hunting and target accuracy or lack of accuracy usually is the shooter.

 

[lhsako]

thats's a tremendous bull for eastern canada! really sweet eye guards too. congratulations !!!!

 

[rugerbob]

Bull Moose 2007, couple hunderd pounds heavier, required a follow-on shot.

 

[misako50]

Brings back good old memories. Happy faces and hard work.Thanks for the pics, rugerbob-Misako